Now what about the head.
} Jul 23, Another possibility would be a small screwdriver & hammer, forced between the bushing & swingarm. Once you open a gap, you can then use a larger screwdriver, punch or even a steel cut masonry nail to collapse the steel shell into a (more or less) heart shape, then pull it.
The new bushings will have to be pressed into place. May 22, I took my frame and swingarm to get powder coated, only to realize I had completely forgotten about this little bugger What is this thing bald cypress tree fall, Cordova TN and how do I make it go away? I've tried putting and small socket on one side and a very large socket on the other side, then put the whole unite Missing: Monroe GA.
Feb 25, Place the swing arm in a vice with wooden inserts to protect the metal swing arm. Make sure to secure the swing arm in a position to maximize the force that you hammering will put on the bushing. Set the socket on the bushing, place the bolt through the socket to center it on the bushing (and save your socket), and start hammering stumpdelimbing.clubted Reading Time: 50 secs. Aug 21, The old swing arm bushing are a pain to remove. After replacing a couple of these in past, I use this method.
Take a hack saw blade and start sawing through the bushing length wise (careful not cut the metal) do this to opposite sides of the bushing. Then take a punch or thin screwdriver b/n the bushing and swing arm and stumpdelimbing.clubg: Monroe GA. Jun 29, Make sure you obtain new bushings front and back before you remove the old ones since they should be replaced after removal. CB K5 - Uber Café- Engine build 3 CL K4 - Cafe build done waiting on final assembly Best deal on the swing arm bushings, email bob see what he has, tell him you are with honda stumpdelimbing.clubg: Monroe GA.